bedCLAW Steel Rails Fit Either Twin or Full-Size Beds Twin/Full angle steel bed side rails are designed to fit either Twin or Full-Size Beds. To use these rails, the pins inside the slot of your headboard and footboard should be 2 inches apart. Shipped without a box for ease of opening. Quality Construction The Hook-On Brackets are double riveted for strength and durability. The bedCLAW Twin/Full-Size Steel Bed Rails are made with pride in the U.S.A. Features: Versatile: Dependable support for Twin and Full Size Sturdy Construction: 1-1/2" x 1-1/2" (vertical) x 76" x 12 gauge side rails Economical Made in the U.S.A. Please measure your current rails before ordering. These are for Standard Twin and Full size beds, not XL or Extra Long. These rails have also been used for Queen or King size "Sleigh" type beds. Please measure your current rails before ordering. The industry-standard hook plates incorporated into both ends of the rails will probably fit any headboard/footboard manufactured within the last 40 years. Please measure the distance from the two pins in your headboard/footboard to confirm that they are 2" apart from the center to determine that our rail hook plates will fit appropriately.  Please review all measurements and connections prior to ordering to ensure these rails will fit your bed. Please inquire if you have any questions prior to ordering.  The price is for a pair of side rails (one for each side of the bed). Rails are sold in pairs only in order to assure a correct fit. These are the same original factory rails that are supplied by many bed manufacturers. Please note, however, that the rails shown may not match your rails exactly. Images are for representative photos and do note that the specific rails you receive may differ slightly from the image shown here. Ltd. Lifetime Service Policy Our Ltd. Lifetime Policy runs from the original date of purchase and covers the repair of manufacturing defects or replacement of your purchased product. Item must be clean and free of stains or damage. Transportation charges and a Policy Service Fee are the responsibility of the consumer. To email your clear images of the issue go to the storefront for our contact information. Then you will receive information on the next steps and/or additional information on this policy.

Adjust for Height of Headboard / Footboard The #35 Down Hook Bolt-On Conversion Bracket for Headboard and Footboard attachment allows the consumer to make an adjustment for height. Thus, different size headboards and footboards can be accommodated. There is no provision for width adjustment with this bracket. Adjustment Range: Vertical: 2". Note on the Vertical Adjustment Range The vertical adjustment dimensions are based on the bracket bolts being approximately 2 1/2" apart. Placing the bolts closer together would result in a greater vertical adjustment range, but could possibly decrease the strength of the connection. If a vertical height adjustment, within the specified range of 2" is needed, then #35 would be the correct choice. Hooks Are Pointed Down The hooks on the #35 are pointed down. The #35 bracket should be used when the headboard and/or footboard can support the weight of the bed. What Is Included The #35 Hook Plate Conversion Adapter Kit for Using a Bolt-On Frame with a Hook-On Headboard comes as a pack of 2. The #35 conversion bracket comes with 2 #35 brackets, nuts, and bolts. WF Ltd. Lifetime Service Policy

RAILS ARE SHIPPED BARE (UNBOXED) TO SAVE ON TREES.  These bedCLAW bed rails attach to your headboard and footboard which continue to provide support for your bed. These bed rails will attach to bolt-on type headboards and footboards. The bed rails feature very sturdy construction. The side rails measure 1-1/2" x 1-1/2" (vertically) x 76" long x 12 gauge. They also feature a black finish. These rails are quality made with pride in the United States under strict quality control guidelines.  Features:  Versatile: Twin and Full Size.  Rail Length: 76".  Included Bolt-On Headboard & Footboard Brackets.  Sturdy Construction: 1.5" x 1.5" x 76" x 12 gauge side rails.  Quality Made In the United States.  Please inquire should you have any questions or concerns. Don't forget to measure! The price is for a pair of side rails (one for each side of the bed). Rails are sold in pairs only in order to assure a correct fit. These are the same original factory rails that are supplied by many bed manufacturers. Please note, however, that the rails shown may not match your rails exactly. Images are for representative photos and do note that the specific rails you receive may differ slightly from the image shown here.

This BedClaw Extended Wood Bed Rail Connecting Fitting is made for connecting wood side rails to the headboard and footboard of your bed. This extended fitting is 5" Long and allows you to connect larger Wood Rails to your bed. These are great for repairs or for making your own bed. This bed fitting is designed for use with machined-recess installation with square corners. Please note that these are shipped as a set of 4 pairs (male and female pieces).

Application: The bedCLAW Noval K Extended Bed Fitting is used for connecting or joining corners.  Built-In Convenience Feature: The pointed teeth on this item allow the installer to affix the fitting in place before attaching it with screws. The pointed teeth aid in the installation and also serve to enhance the strength of the connection after installation.  The Extended Version: This is the extended version of the original Noval K bracket and it features 3 hooks instead of 2 for maximum support. Includes:  (2) Left Male Plates  (2) Right Male Plates  (4) Female Brackets  Install with #8 Screws (not included)

This bedCLAW Twin or Full Size Steel Bolt-On Bed Frame provides lasting support with solid steel construction. The frame rests on four in-line rug rollers. Solid construction offers a strong foundation for any mattress Four inline rug rollers Easy 5-minute assembly from box to bed frame Bolt-on headboard brackets are compatible with most headboards Easily adjusts to fit Twin or Full bed sizes Additional Features 1.5" x 1.5" high carbon rail steel side rails and 1.25" x 1.25" high carbon rail steel cross arms Keyslot cross arms and spring clip assembly assure easy assembly and secure support Heavy-duty locking legs Bolt-on headboard brackets Made with recycled USA rail steel Quick and easy to assemble, no tools required

This bedCLAW Twin/Full/Queen Adjustable Bed Frame provides lasting support with solid steel construction. The frame rests on four 2.25" in-line rug rollers with two locking wheels. Solid construction offers a strong foundation for any mattress Four Extra-wide, 2.5-inch inline rug rollers Easy 5-minute assembly from box to bed frame Bolt-on headboard brackets are compatible with most headboards Easily adjusts to fit Twin, Twin XL, Full, Full XL, and Queen bed sizes Additional Features 1.5" x 1.5" high carbon rail steel side rails and 1.25" x 1.25" high carbon rail steel cross arms Keyslot cross arms and spring clip assembly assure easy assembly and secure support Heavy-duty locking legs Bolt-on headboard brackets Made with recycled USA rail steel Quick and easy to assemble, no tools required

This bedCLAW Twin or Full Size Steel Bolt-On Bed Frame provides lasting support with solid steel construction. The frame rests on four feet for optimal support.  Solid construction offers a strong foundation for any mattress Four support feet Easy 5-minute assembly from box to bed frame Bolt-on headboard brackets are compatible with most headboards Easily adjusts to fit Twin or Full bed sizes Additional Features 1.5" x 1.5" high carbon rail steel side rails and 1.25" x 1.25" high carbon rail steel cross arms Keyslot cross arms and spring clip assembly assure easy assembly and secure support Heavy-duty locking legs Bolt-on headboard brackets 

This bedCLAW Twin/Full/Queen Adjustable Bed Frame provides lasting support with solid steel construction. The frame rests on four 2.25" in-line rug rollers with two locking wheels and an additional glide foot in the middle for optimal support.  Solid construction offers a strong foundation for any mattress Four Extra-wide, 2.5-inch inline rug rollers, and an additional support foot Easy 5-minute assembly from box to bed frame Bolt-on headboard brackets are compatible with most headboards Easily adjusts to fit Twin, Twin XL, Full, Full XL, and Queen bed sizes Additional Features 1.5" x 1.5" high carbon rail steel side rails and 1.25" x 1.25" high carbon rail steel cross arms Keyslot cross arms and spring clip assembly assure easy assembly and secure support Heavy-duty locking legs Bolt-on headboard brackets  70" Side rails with end caps to protect the bedding Made with recycled USA rail steel Quick and easy to assemble, no tools required

Exclusive bedCLAW Wood Side Rails are a great solution for replacing broken or missing wood rails. These wood rails are laminated with top-edge veneer banded faces. This process results in a wood rail which is much stronger than a solid wood rail. It is also more stable; a laminated rail will not warp or bow as a solid wood rail can. Wood bed rails provide that classic timeless beauty that the discriminating connoisseur of fine furniture demands. Whether building a new bed or restoring an older bed, wood bed rails provide beauty and warmth unmatched by any other rail system. The industry-standard hook plates incorporated into both ends of the rails will probably fit any headboard/footboard manufactured within the last 40 years. Please measure the distance from the two pins in your headboard/footboard to confirm that they are 2" apart from the center to determine that our rail hook plates will fit appropriately. The price is for a pair of side rails (one for each side of the bed). Wood Rails are sold in pairs only to ensure a correct fit. These are the same original factory rails that are supplied by many bed manufacturers. Please note, however, that the color shown may not match your frame exactly. These rails are 82 inches Long to fit Queen or King sized beds. (Will also fit Twin XL or Full XL, but not standard Twin or Full, please measure the length of your mattress). These rails are approx. 6-5/8 inches tall. An inside lip runs down the inside of each rail, allowing easy and secure attachment of center support systems. Please measure your current rails before ordering. These are for Standard Queen and King size beds, not "Sleigh" type beds. Queen and King sized "Sleigh" type beds tend to use rails that are for Standard Twin or Full sized beds. Installing these wooden side rails along with a matching steel center support not only protects your new wood rails from bowing and breaking but also prevents your mattress from sagging and protects your mattress warranty. You will sleep more comfortably knowing that your bed is sturdy and secure. Our WF Limited Lifetime Service Policy only covers manufacturing defects in wooden rails when subject to proper handling and normal use in conjunction with a center support system that provides continuous support. To provide continuous support, a Queen or King frame must have a rigid bridge bar with at least 3 support legs or 3 equally spaced hardwood cross-slats with a supporting center leg.

Introducing our Stainless Steel Hinge Repair Brackets! These sturdy brackets are designed specifically to fix and reinforce hinges on cabinets and other furniture. Made from high-quality stainless steel, they provide long-lasting support. Each Hinge Repair Bracket measures 90mm by 90mm, offering a perfect fit for most standard-sized hinges. Whether you're repairing a loose or damaged hinge or simply looking to reinforce existing ones, these brackets are the perfect solution. With the included screws, installation is a breeze. Simply align the bracket with the hinge, secure it using the screws provided, and you're good to go. The stainless steel material and robust design ensure a secure and reliable connection, giving you peace of mind that your hinges will stay in place. These Hinge Repair Brackets are not only practical but also aesthetically pleasing. The sleek stainless steel finish adds a touch of modern elegance to your doors or cabinets, seamlessly blending with any décor style. So if you're tired of wobbly hinges or need some extra support, our Stainless Steel Hinge Repair Brackets are the answer. With their durable construction, perfect size, and easy installation, they are a must-have for any DIY enthusiast or homeowner looking to fix or reinforce their hinges. Say goodbye to loose doors and hello to improved functionality and stability. Upgrade your hinges today with our Stainless Steel Hinge Repair Brackets! bedCLAW brand items are backed by the WF Ltd. Lifetime Service Policy! Ships from High Point, NC known as the Furniture Capital of the World.

Super Heavy Duty, 6mm Thick. Door or Gate reinforcement brackets to prevent "kick-ins" or entering the dog yard. Easily reinforce your door or gate with 2x4s. • Hot Rolled Steel for maximum strength • Extra thick, 6mm construction-grade steel for extreme strength and durability to withstand 1,100 lbs. of kick-in force when properly secured into the frame • Surface treated with black powder coating for use indoors or outside • Ideal fit for 2x4 or 2x6 lumber, not included • Works with all types of inswing or outswing doors or gates. Great fit for 2x4 lumber & Comes With 2 Years Warranty - works with all types of inswing or outswing door sizes. Lumber is not included • Ideal for office, warehouse, home, backyard, barn, shed, garage, basement, and gate to prevent unlawful entry • EASY TO INSTALL, Door barricade brackets come with 3 screw holes and can effectively support to ensure your safety THE TRUST, BRANDING, AND THE REPUTATION COME FROM THE QUALITY OF THE PRODUCT. Warning Sign Sold Separately. Wallace Flynn proudly produces, manufactures, distributes, and retails the finest products for industry, business, and direct consumers. Because of our commitment to satisfaction and reputation, your Wallace Flynn purchase may qualify for our Ltd. Lifetime Service Policy. Look for the LIFETIME seal on the website of purchase. Contact Wallace Flynn and include clear and close pictures of the issue involved. A copy of proof of date and place of purchase will validate the service. All requests are subject to a Policy Service Fee and shipping charges. Customer service will let you know what the next steps will be. The Policy Service Fee allows us to expedite your claim digitally without requiring you to return the product to us for inspection. bedCLAW® is a registered trademark of WALLACE FLYNN INC.

Wood bed rails provide that classic timeless beauty that the discriminating connoisseur of fine furniture demands. Whether building a new bed or restoring an older bed, wood bed rails provide beauty and warmth unmatched by any other rail system.     Exclusive Bed Claw Wood Side Rails are a great solution for replacing broken or missing wood rails. These wood rails are laminated with top edge veneer banded faces. This process results in a wood rail which is much stronger than a solid wood rail. It is also more stable; a laminated rail will not warp or bow as a solid wood rail can.     The industry-standard hook plates incorporated into both ends of the rails will probably fit any headboard/footboard manufactured within the last 40 years. Please measure the distance from the two pins in your headboard/footboard to confirm that they are 2" apart from the center to determine that our rail hook plates will fit appropriately.     The price is for a pair of side rails (one for each side of the bed). Wood Rails are sold in pairs only in order to assure a correct fit. These are the same original factory rails that are supplied by many bed manufacturers. Please note, however, that the color shown may not match your frame exactly.     These rails are 76 inches Long to fit Twin or Full size beds. Wood rails are approx. 6 3/4 inches tall. An inside lip runs down the inside of each rail, allowing easy and secure attachment of center support systems. Please measure your current rails before ordering. These are for Standard Twin and Full size beds, not XL or Extra Long. These rails have also been used for Queen or King size "Sleigh" type beds. Please measure your current rails before ordering. Our WF Limited Lifetime Service Policy only covers manufacturing defects in wooden rails when subject to proper handling and normal use in conjunction with a center support system that provides continuous support. To provide continuous support, a Queen or King frame must have a rigid bridge bar with at least 3 support legs or 3 equally spaced hardwood cross-slats with a supporting center leg.

The bedCLAW Heavy-Duty Mattress Retainer Bracket attaches to the bed frame with the included wood screws. The Mattress Retainer Bracket is then adjusted to hold the mattress, box spring, or foundation in a stationary position on the bed frame. In some cases, the bedCLAW Heavy-Duty Mattress Retainer Bracket is used by hotels to add additional brackets to bed frames or bases to hold the mattress securely in place. The bedCLAW Heavy-Duty Mattress Retainer Bracket may be adjusted to the width of the mattress or foundation unit being supported by loosening the included wood screws and sliding the Mattress Retainer Bracket along the length of the internal 1/4" slot through which the screw is inserted. Our bedCLAW Heavy-Duty Mattress Retainer Brackets are the perfect replacement for your conversion bed frame or other home improvement project. We do recommend you pre-drill a pilot hole where you'd like to install the brackets. Each set includes 2 Heavy-Duty Brackets and 4 Wood Screws. Ideal for wooden, platform, and other specialty beds.

Save yourself a trip to the hardware store when you purchase your new bed frame, bolt-on rail system, or extension kit. The Combo Bag has everything you need to connect your headboard or footboard to your frame or rails. Available in 3.5" or XL 4.5" Bolt Lengths 4 x Bolts (1/4-20) 4 x Hex Nuts 4 x Washers